If your Range Rover Evoque key fob has stopped working after replacing the battery, you are not alone. This is a very common issue and in most cases the key is not faulty or broken.

The problem is usually caused by a simple mistake during the battery change or a small step that was missed. This guide explains exactly why it happens, what to check, and when professional help is needed.

Common reasons your Range Rover Evoque key fob stopped working

After a battery change, the key fob should work immediately. If it does not, one of the following is almost always the cause.

The battery is fitted the wrong way around

This is the most common issue.

Most Range Rover Evoque key fobs use a coin style battery that must be installed with the correct side facing up. If the battery polarity is reversed, the key will appear completely dead.

What to check
Remove the battery
Check the plus symbol on the battery
Reinstall it exactly as shown inside the key fob

The battery is new but already flat

Not all new batteries are actually good.

Batteries that have been stored for a long time or bought cheaply can be weak straight out of the packet.

What to check
Try a different brand new battery
Avoid no name or budget batteries
Use a well known brand

The battery is not making proper contact

During the battery change, the metal contact tabs inside the key fob can be bent slightly or not seated correctly.

If the battery is loose, the key will not power on.

What to check
Make sure the battery sits firmly in place
Gently press the metal contacts back into position if needed
Ensure the key fob casing clips together fully

The key fob casing is not fully closed

If the key fob is not clicked shut properly, the internal circuit may not power up.

What to check
Open the key again
Refit the battery
Press the casing together until it fully clicks closed

Does the key need reprogramming after a battery change

No.
Changing the battery does not erase programming on a Range Rover Evoque key fob.

If your key is not working after a battery change, it is almost never a programming issue.

If someone tells you the key needs coding simply because the battery was replaced, be cautious.

What to do if the key still does not work

If you have checked all the steps above and the key fob still does not respond, there may be a deeper issue.

Possible causes include
Internal key fob damage
Water or moisture inside the key
Worn internal components
Vehicle not detecting the key signal

At this point, further battery changes will not help.

Can you still start your Range Rover Evoque with a dead key fob

Yes.
Even if the remote buttons do not work, most Range Rover Evoque models allow emergency starting using the key fob.

The exact procedure depends on the model year, but the vehicle can usually detect the key when it is placed in a specific position inside the car.

If you are unsure how to do this, professional assistance is recommended to avoid immobiliser issues.

When to get professional help

You should contact a specialist if
The key does not work after multiple battery changes
The vehicle does not recognise the key
The key fob has been dropped or exposed to water
You only have one working key

A specialist can test the key, confirm whether it is repairable, and provide a replacement if needed.

Need help with your Range Rover Evoque key

We provide a fully mobile Range Rover key service across the UK.

Whether your key fob has stopped working, needs testing, or requires replacement, we can help without dealership delays.

If your Range Rover Evoque key fob is not working after a battery change and you need fast assistance, get in touch and we will guide you through the next steps.

If you’re looking for a spare key for your Jaguar or Land Rover, or if you need a lost key deleted from your vehicle’s system for security, please feel free to get in touch with us at National Car Keys.